304 stainless steel sliding door roller with three wheels
| Brand Name | Meigoo |
| Model | A008c |
| Application | Sliding glass door,fan-shaped door,acr door. |
| Diameter of wheel | 23-26mm |
| Can hold glass | 6-8 mm |
| Diameter of hole | 5 mm |
| Wheel thickness | 5-6 mm |
| Stress less | 30 kg |
| Material | 304 stainless steel main body, stainless steel bearing,pvc |
| OEM/ODM | Acceptable |
| Delivery | 25 days |
| Loading port | Guangzhou ,Shenzhen port |
| Payment term | 30% first pay,70% payment before deliver. |
| After sale service | Online training,online technical support. |
| Warranty | 2 years |
Product description
* stainless steel make the roller less noise ,anti-rust,long-life.
* special pvc let the roller running smoothly and long-life.
1) Your patio glass door will have two separate glass units.
One unit is the door that you slide and the other unit is
stationary. First, stand outside your house and look at your
sliding glass door. If the stationary door unit is between you and
the sliding unit you will most likely have to remove the stationary
unit so that you can get to the glass sliding unit.
Before you go through the trouble of removing the stationary door
unit, first try to go inside your house and see if you can remove
the sliding door unit. Usually you cannot because there is a lip
along the bottom of the patio glass door frame (it keeps moisture
out of the house) that prevents the sliding glass door from being
removed from the inside.
If the rollers on the bottom of the door are difficult to get over
the lip, you can adjust them to help you create more room (go down
to step 2). If it is not the rollers but the sliding unit's frame
preventing you from pulling the sliding unit out of the door frame,
you are going to need to remove the stationary door unit first
before you can remove the sliding unit.
To remove the stationary door unit, you first need to take out your
screen door (if you have one). Lift one end of the screen door
frame and use a screwdriver to lift the roller on the bottom of the
screen door frame off of the track. Do this to both ends of the
screen door and your screen door will pull out of the door frame.
The stationary door unit is held in place by a metal piece that
runs along the bottom of the track from the corner of the
stationary door unit to the bottom of the side jamb (there is a
chance this piece is missing but if you do have one remove it from
the track). After you have removed the metal piece, look for screws
holding the stationary unit frame in place. After removing all of
the screws try pulling the stationary door unit out of the door
frame. If you are having trouble pulling out the stationary door
unit, try placing a screwdriver between the stationary door unit's
bottom frame and the track it is resting on. Lift up on the
screwdriver while you have a helper pull out the stationary door
unit from the door frame. Be careful not to use too much force with
the screwdriver so that you do not damage the door track.
FAQ
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q: How long your delivery time?
A: General is 15-20 days.and we can negotiation it.
Q: Do you provide samples?is it free or extra?
A: We can provide sample if first time cooperate,you need pay the
sample and cost of shipping.
Q: What is you payment term?
A: Payment less 1000 USD,pay 100% in advance,payment over 1000
USD.,first pay 30%,settle the payment before delivery.
Q: What about your quality?
A: Usually we will confirm the sample by both,and our QC will
strictly to check every step,and make sure every piece must be
inspection before delivery.we accept change if there are seriously
quality problem that affect your client use it.
